VTrak
Expansion Chassis Specifications |
|
| Expansion Chassis I/O Module Features | |
| I/O Modules | Dual active/active SAS I/O modules support failover/failback and active/active drive access |
| Drive Support: | »
Up to sixteen 3.5" x 1" hard drives » SAS 3Gb/s, SATA II 3Gb/s and 1.5Gb/s* » Supports any mix of SAS and SATA drives simultaneously in the same enclosure |
| External I/O Ports | Each I/O module
has two SAS ports using industry standard Mini SAS 4x wide-port-SAS
connectors (SFF-8088), one IN and one OUT |
| SAS
Features |
|
| ANSI T10 SAS 1.0 and 1.1 Compliant
|
|
| Management Function With Expander Embedded Processor |
»
Self-configuring expander support full SAS domain topology
management » SMP – SAS Management Protocol » In-band access to Expander and PHY information » Statistics counters and performance monitors » SES EM SES Enclosure Management (ANSI T10 SES 2 Compliant) » SCSI SES command set over virtual SSP device |
| System
Management |
|
| Supported Operating Systems | Mac
OS X, Mac OS X server, versions 10.5.2 and later, Windows 2003,
Linux (Red Hat, SuSE) |
| Management Interfaces | » LED status indicator
support for drives, FRU, and enclosure environmentals » In-band SES enclosure management alerts user to out of spec operation; thermal condition, voltage condition or component failures, protecting data and hardware » Full subsystem management CLI through out-of-band RS232 serial port |
| Enclosure Management Protocols | SES over in-band
SAS |
| Mechanical Specification
|
|
| Voltage | 100-240
Vac Auto-Ranging |
| Current (Maximum) | 8 A @
100 Vac; 4 A @ 240 Vac (current rating with two power cords) |
| Power Supply | Dual
500W, 100-240 Vac auto-ranging, 50-60 Hz, dual hot swap and redundant
|
| Power Consumption | 108.38 Watts
(under load w/o HDD), 523.91 Watts (under load with SAS HDD) |
| Operating Temperature/ Humidity | 5°~40°C (-40°~60°C
non operational) / Maximum 95% |
| Vibration | Random, 0.21 grms, 5-500Hz,
X, Y, Z axis |
| Dimensions
(H x W x D) |
13.1x 44.65x 56.1 cm
(5.2 x 17.6 x 22.1in) |
| Weight *Assume each hard drive = 0.5 kg |
Net weight:
30.5 kg (67.2 lbs) without drives, 38.5 kg (84.9 lbs) with 16 drives*
Gross weight: 37.5kg (82.7 lbs) without drives |
| Safety | CE, FCC ClassA, VCCI, cUL, TUV,
CB, BSMI, C-Tick, MIC |
| Warranty and Support
|
|
| Warranty
|
Three years limited warranty |
| Support
|
24x7 email and phone support (English only); 24x7
access to Promise support site-drivers, firmware, compatibility
|